EDUCATION

PROJECTS (PI)

1. NSFC Funding, Study on Functional Gradient Structure Design and Wave Absorbing Performance Optimization of 3D Printed Graphene-based Nanocomposites, No. 51902295. (100%, RMB 250,000, 2020/1/1-2022/12/31)

2. Central University - Outstanding Talents Cultivation Fund Project, Research on graphene enhanced bio-based photosensitive resin in additive manufacturing technology formation; No. CUG170677. (100%, RMB 300,000, Completed)

3. Wuhan Science and Technology Bureau Funding, Key technology of green laser selective melting additive manufacturing of high-resolution and high thermal conductivity diamond composites, No. 2020010601012172. (100%, RMB 500,000, 2020/1/1-2022/12/31)

4. Hubei Natural Fund project, Regulation and Stability Mechanism of 3D Gradient Porous Structure of Carbon/TiO₂ and Rectorite for Water Treatment, No. 2019 CFB264. (100%, RMB 50,000, Completed)

5. Hubei Jewelry Engineering Technology Research Center, Key technology of laser selective melting additive manufacturing of high-resolution and high thermal conductivity copper composite, CIGTXM-03-202003. (100%, RMB 50,000, on-going)

PROJECTS (Co-PI)

1. Department of science and technology of Hubei Province, (2021), Integrated additive manufacturing of new engine thrust chamber and cooling structure of dissimilar metals. ( RMB: 2,600,000, on-going)

2. Hubei jewelry Engineering Technology Research Center, Silver alloy additive manufacturing, No. CIGTXM-01-202001. ( RMB: 500,000, on-going)

3. NSFC International Exchange and Cooperation Project, Multiple Mineral Material (M³) Additive Manufacturing and Digital Design for Sustainability, No. 5191101701. (Co-PI, RMB: 500,000, on-going)

4. National key R&D Plan Project, Research on Origin Traceability and Adulteration Identification Technology of Resources and High Value Products, No. 2018YFF0215400. (Co-PI, RMB: 2,600,000, completed)

5. NSFC Funding, Preparation and wear properties of new low-cost and high-performance wear resistance ceramics, No. 51272241. ( RMB: 800,000, completed)

6. British TSB Project, NanoSynth: Graphene-Reinforced Epoxies for High Performance Applications, No. 101257. http://www.nanosynthproject.org.uk/ (My Ph.D research, completed)

7. European Project, Polygraph: Up-Scaled Production of Graphene Reinforced Thermosetting Polymers for Composite, Coating and Adhesive Applications, No.604143, http://www.polygraphproject.eu / (My Ph.D research, completed)

8. Industrial Funding, Precious metal jewelry digital design and manufacturing industry technology innovation center, ( RMB: 3,000,000, on-going)

9. Industrial Funding, Research on the application of precious metal 3D printing in high-end jewelry customization. ( RMB: 300,000, completed)

10. Industrial Fuding, Development of finger ring measuring equipment and 3D printing jewelry. (RMB: 500,000, completed)

BOOK CHAPTERS 

·  L. Hao, Y Li, Fundamentals of 3D Food Printing and Applications: Material, Process and Business Development for 3D Chocolate Printing. Academic Press, (2018), ISBN: 9780128145647.

·  Y Li, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting, Academic Press, (2021). ISBN: 9780128244388.

JOURNAL PUBLICATIONS

[1] Li Y., Feng Z., Peijs T., A Review on Functionally Graded Materials and Structures via Additive Manufacturing: from Multi-scale Design to Versatile Functional Properties, Advanced Materials Technologies, 2020. DOI:10.1002/admt.201900981.

[2]  Li Y., Feng Z., Essa K., Bilotti E., Peijs T. Additive manufacturing high performance graphene-based composites: A review. Composites Part A：Applied Science and Manufacturing, 2019, 124: 105483.

[3] Li Y., Peijs T., Bilotti E., et al, Synergistic Effects of Spray-Coated Mixed Carbon Nanoparticles for Enhanced Electrical and Thermal Surface Conductivity of CFRP Laminates, Composites Part A：Applied Science and Manufacturing, 2018, 105: 9-18.

[4] Cheng K., Xiong W., Li Y.*, Hao L., et al. In-situ deposition of diamond on functionally graded copper scaffold for improved thermal conductivity and mechanical properties. Materials Letters, 2021, 299: 130050.

[5] Cheng K., Li Y.*, In-situ Deposition of Three-Dimensional Graphene on Selective Laser Melted Copper Scaffolds for High Performance Applications, Composites Part A：Applied Science and Manufacturing, 2020, 135: 105904. DOI: doi.org/10.1016/j.compositesa.2020.105904.

[6] Gong P., Hao L.*, Li Y., Li Z.*, Xiong W., 3D-Printed Carbon Fiber/Polyamide-based Flexible Honeycomb Structural Absorber for Multifunctional Broadband Microwave Absorption, Carbon, Accepted. 2021.

[7] Wang Y., Xiong W., Tang D., Hao L., Li Z., Li Y. and Cheng K. Rheology effect and enhanced thermal conductivity of diamond/metakaolin geopolymer fabricated by direct ink writing, Rapid Prototyping Journal, 2021, 27(5): 837-850. DOI: https://doi.org/10.1108/RPJ-06-2020-0124.

[8] Gong P., Hao L.*, Tang D., Li Y.*. Design of a debinding process for polymetallic material green parts fabricated via metal paste injection 3D printing with dual nozzles. RSC Advances, 2020, 10. DOI: 10.1039/C9RA07550J.

[9] Giovanni S., Li Y., et al. Breaking the nanoparticle loading-dispersion dichotomy in polymer nanocomposites with the art of croissant-making, ACS NANO. 2018, 12(9): 9040-9050. DOI: 10.1021/acsnano.8b02877.

[10] Tang D., Hao L., Li Y., et al, Investigation of Wax-Based Barite Slurry and Deposition for 3D Printing Landslide Model, Composites Part A: Applied Science and Manufacturing, 2018, 108: 99-106.

[11] Tang D., Hao L., Li Y.*, et al. Direct Ink Writing of Mineral Materials —A review, International Journal of Precision Engineering and Manufacturing-Green Technology，2020. DOI: doi.org/10.1007/s40684-020-00222-6.

[12] Xiong W., Hao L.*, Li Y.*, Tang D., Cui Q., Feng Z., Yan C. Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy. Materials & Design, 2019, 170: 107697.

[13] Tang D., Hao L., Li Y.*, et al. Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials. Journal of Alloys and Compounds, 2020, 814: 152275.

[14] Tang D., Hao L., Li Y.*. and Li Z. Effect of clay functionally graded materials on dual gradient direct ink writing behavior and microstructure of geological model", Rapid Prototyping Journal, 2020, 26(1): 39-48. DOI: https://doi.org/10.1108/RPJ-01-2019-0023.

[15] Li Z., Qi W., Cao J., Li Y.*, Viola G., Jia C., Yan H. Multiferroic properties of single phase Bi₃NbTiO₉ based textured ceramics. Journal of Alloys and Compounds, 2019, 788: 701-704.

[16] Feng Z., Li Y.*, Hao L., et al. Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds. Journal of Nanomaterials, 2019:1-13.

[17] Pan R., Li Y.*. Microscopic morphology, thermodynamic and mechanical properties of thermoplastic polyurethane fabricated by selective laser sintering，Materials Research Express, 2020, 7(5): 055301. DOI: https://doi.org/10.1088/2053-1591/ab8b87.

[18] Feng Z., Li Y.*, Zhang H. Fabrication of Graphene-Reinforced Nanocomposites with Improved Fracture Toughness in Net Shape for Complex 3D Structures via Digital Light Processing，Journal of Carbon Research，2019, 5(2): 25. DOI: http://dx.doi.org/10.3390/c5020025.

[19] Feng Z., Liu L., Li L., Chen J., Liu Y., Li Y., Hao L., Wu Y. 3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells. International Journal of Hydrogen Energy，2019, 44(26): 13843-13851.

[20]  Li Z., Qi W., Cao Jun., Li Y., Viloa G. Spark plasma sintering of grain-oriented Sr₂Bi₄Ti₅O₁₈ aurivillius phase ceramics, Journal of Alloys and Compounds, 2019. 782(25): 6-9.

[21]  Cao J., Koval V., Zhang H., Lin Y., Wu J., Meng N., Li Y., Li Z., Zhang H., Yan H. Crystal structure and electrical properties of textured Ba₂Bi₄Ti₅O₁₈ ceramics. Journal of the European Ceramic Society 2019, 39(4): 1042-1049.

[22] Li Y., Peijs T., Bilotti E., et al, Mechanical, Electrical and Thermal Properties of In-situ Exfoliated Graphene/Epoxy Nanocomposites. Composites Part A：Applied Science and Manufacturing, 2017, 95: 229-36.

[23] Li Y., Peijs T., Bilotti E., et al, Graphite Nanoplatelet (GNP) Modified Epoxy Resin for Carbon Fibre Reinforced plastics (CFRP) with Enhanced Properties. Journal of Nanomaterials, 2017, Article ID 5194872. DOI: https://doi.org/10.1155/2017/5194872.

[24] Li Y., Peijs T., Bilotti E., et al, In-situ exfoliation of graphene in epoxy resins: a facile strategy to efficient and large scale graphene nanocomposites. ACS Applied materials & Interfaces, 2016, 8(36): 24112-24122.

[25] Li Y., Peijs T., Bilotti E., et al, Enhanced Thermal and Electrical properties of polystyrene - graphene nanoplatelet nanofibres via electro spinning. Journal of Nanomaterials, 2016, Article ID 4624976. DOI: http://dx.doi.org/10.1155/2016/4624976.

[26] Li Y., Zhang H., Fang M. Characterization of dielectric performance of tourmaline single crystals from Yunnan, China. CrystEngComm. 2012, 14(21): 7153-7156.

[27] Li Y., Zhang H., Peijs T., et al. Graphene Delivery Systems for Hierarchical Fibre Reinforced Composites. MRS Advances, 2016, 19(1): 1339-1344.

[28] Li Y., Zhang H., Bilotti E., et al. Optimization of Three-Roll Mill Parameters for In-Situ Exfoliation of Graphene. MRS Advances, 2016, 19(1): 1389-1394.

[29] Li Y., Huang Z., Liu Y., Fang M. Preparation and Performance Characterization of Nanometer-Sized Tourmaline Films, Key Engineering Materials, 2013, 537: 252-255.

[30] Guo C., Zhang S., Li Y. 3D Geological Modeling and Assessment of Site Suitability based on Orthogonal Polynomials and Markov Matrix. International Information Institute (Tokyo). Information, 2012, 15(11): 47-55.

[31] Li Y., Guo Y. Colorimetry Study on Red Tourmaline Color Genesis, Key Engineering Materials, 2012, 512-515: 657-660.

[32] Li Y., Huang Z., Liu Y. Study on Mineral Composition and Main Mineral Morphology of Bauxite from ZhongXiang, HuBei Province, Key Engineering Materials, 2012,12-515: 648-651.